Range Rover (LP) V8-4.6L (2001)
Exhaust Pipe: Service and Repair
Intermediate and Rear Pipes
INTERMEDIATE AND REAR PIPES
Service repair no - 30.10.11 - Intermediate
Pipe Service repair no - 30.10.22 - Rear Pipe
Remove
1. Raise vehicle on four post lift.
2. Remove 4 nuts securing intermediate pipe flanges to front and rear pipes.
3. Release 2 mounting rubbers. Remove rear pipe
4. With assistance, release 2 mounting rubbers. Remove intermediate pipe.
Refit
5. Ensure mating faces are clean.
6. With assistance, position intermediate pipe. Secure with mounting rubbers.
7. Position rear pipe. Secure with mounting rubbers.
8. Position intermediate pipe flanges. Secure with nuts. Tighten to 25 Nm (18 ft. lbs.).