Range Rover (LP) V8-4.6L (2001)
10. Disconnect 2 pipes from condenser. Remove 'O' rings and discard. Plug pipes and connections.
11. Remove 2 bolts securing condenser upper mounting brackets to radiator mounting.
12. Remove 2 lower securing bolts. Remove condenser.
13. Remove 2 bolts securing mounting brackets to condenser. Remove brackets.
Refit
14. Fit mounting brackets to condenser. Secure with bolts.
15. Position condenser. Secure with bolts.
16. Remove plugs from pipes and condenser.
17. Lubricate new 'O' rings with compressor oil. Fit to connections.
18. Connect pipes to condenser. Tighten to 15 Nm. (11 labor.ft)