landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

ABOUT US
Idle Speed/Throttle Actuator - Electronic > < Diagram Information and Instructions|Page 2584

Range Rover (LP) V8-4.6L (2001)

Page 1
background image

Fuel Temperature Sensor: Service and Repair

Service repair no - 19.22.08

Remove

NOTE:  Because fuel leakage will not occur when sensor is removed, it is not necessary to depressurize the fuel system for this operation.

1. Disconnect battery negative lead.
2. Disconnect multiplug from fuel temperature sensor.
3. Remove sensor from fuel rail.

Refit

4. Ensure sensor and location in fuel rail are clean.
5. Fit sensor. Tighten to 17 Nm. (13 labor. ft)
6. Connect multiplug.
7. Reconnect battery negative lead.

Idle Speed/Throttle Actuator - Electronic > < Diagram Information and Instructions|Page 2584