Range Rover HSE (LP) V8-4.6L (1997)
/v8-4.6l/Page-709002.png)
4. Remove fan and coupling assembly.
NOTE: Do not carry out further dismantling if component is removed for access only.
5. Remove 4 bolts securing coupling to fan. Remove coupling.
INSTALLATION
1. Ensure mating faces are clean.
2. Install fan to coupling. Secure with bolts. Tighten to 24 Nm (18 ft. lbs.).
3. Using LRT-12-093 and LRT-12-094, or equivalents install fan assembly to pump. Tighten to 56 Nm (41 ft. lbs.).
4. Install cooling fan upper cowl. Secure with clips.
5. Reconnect bakery negative lead.
