Range Rover HSE (LP) V8-4.6L (1997)
/v8-4.6l/Page-425002.png)
5. Remove plugs from hose and steering box.
6. Clean hose and steering box union.
7. Position PAS hose brackets (9) to steering box and secure with nut (8).
8. Install banjo bolt (7) and NEW washers to return hose and fit to steering box, then tighten banjo bolt (7) to 50 Nm (37 ft. lbs.).
9. Position return hose and secure to radiator lower bracket clips (10).
10. Bleed steering system. See: Steering and Suspension/Steering/Power Steering/Power Steering Bleeding/Service and Repair
11. Remove stand(s) and lower vehicle.
