Range Rover HSE (LP) V8-4.6L (1997)
Steering Damper: Service and Repair
REMOVAL
1. Raise the vehicle.
WARNING: Support on safety stands.
2. Remove damper fasteners (2) at both ends.
3. Remove damper (3).
INSTALLATION
1. Install damper (2) to chassis.
-
Install, but do not tighten nut and bolt (2).
2. Install damper to drag link, install nut and bolt (2), then tighten to 80 Nm (59 ft. lbs.).
3. Tighten damper to chassis mounting bolt and nut (2) to 125 Nm (92 ft. lbs.).
4. Remove safety stands.
-
Lower vehicle.