Range Rover HSE (LP) V8-4.6L (1997)
/v8-4.6l/Page-1781002.png)
3. Fit adaptor LRT-54-008I1 3 to base tool and secure with screw.
4. Position base tool assembly to axle yoke.
5. Fit lower joint to adaptor LRT-54-008/1 4
6. Fit adaptor and joint assembly onto base tool.
7. Align tool assembly and press joint into axle.
NOTE: Align tool assembly between each stroke of the ram until the joint is fully seated.
CAUTION: Damage to joint boot will result if tool is not correctly aligned during fitment.
8. Remove base tool assembly.
9. Fit swivel hub.
