Range Rover HSE (LP) V8-4.6L (1997)
/v8-4.6l/Page-1376003.png)
9. Remove cover assembly. Collect friction plate.
INSPECTION
10. Check linings of friction plate for excessive or uneven wear, burning or contamination.
11. Check splines of friction plate for excessive wear.
12. Check friction surface of cover for burning distortion or scoring.
13. Check fingers of cover for cracks and distortion.
14. Check release bearing for smooth operation.
CAUTION: Bearing is packed with grease, do not wash in solvent.
15. Renew components as necessary.
INSTALLATION
16. Ensure mating faces are clean.
NOTE: New friction plates are supplied with splines pre-greased.
17. If reinstallation existing friction plate, smear splines with 'Molycote FB180'.
