Range Rover HSE (LP) V8-4.6L (1997)
Exhaust Manifold: Service and Repair
Removal
1. Disconnect battery negative lead.
2. Raise vehicle on four post lift.
3. Remove 3 nuts securing each front pipe flange to exhaust manifold.
4. Release front pipe from exhaust manifolds. Collect gaskets.
5. Lower lift.
NOTE: Instructions 6 to 11 apply to Left Hand Manifold Only
6. Release intake hose from plenum chamber.
7. Release harness from intake hose clip.
8. Release 2 clips securing air flow meter to air cleaner. Release meter. Collect O-ring.
9. Disconnect multiplug from air flow meter. Remove meter.
10. Release purge hose from ram pipe housing.
11. Remove purge valve securing bolt from shock absorber turret. Place valve aside.
NOTE: Instructions 12,13 & 14 apply to Right Hand Manifold Only.