Range Rover SE (LP) V8-4.0L (1995)
/v8-4.0l/Page-2592004.png)
4.
Inspect the door latch with the aid of a flash light and identify the white plastic retainer for the super-lock pawl spring. (Figure 1)
5.
Position a long (18") slender screw driver onto the plastic cover. (Figure 2)
CAUTION:
In the next step exercise care to only apply enough force to break the plastic housing.
^
Too much force could result in damage to surrounding components or the door panel.
^
Windows with applied tints can be damaged by the screwdriver.
6.
Tap the screwdriver with a hammer to break the plastic cover.
7.
Remove the released spring.
8.
Move to the exterior of the door and perform the following:
^
Grasp the outer door handle.
^
Apply body pressure against the outer door surface to reduce load on the latch.
^
Tap the lock assembly motor repeatedly with the screwdriver (Figure 1) until the super-lock pawl releases.
9.
Release body pressure and open the door.
10.
Follow Workshop Manual Section 76.37.12 procedures to replace the door latch assembly with a new unit.
11.
Remove protective tape and verify proper latch operation.
Technical Service Bulletin # TEC760196
Date: 961201
Front/Rear Door Latch - Buzz on Locking
12/01/96
76/01/96/US
SUBJECT:
Front/Rear Door Latch-Buzz
MODEL:
Range Rover 4.0
AFFECTED VEHICLES:
LP
318963 to 322091
LH
