Range Rover SE (LP) V8-4.0L (1995)
Glove Compartment: Service and Repair
Glove Box and Lid
GLOVE BOX AND LID
Service repair no - 76.52.03 - Glove Box
Service repair no - 76.52.02 - Glove Box
Lid Service repair no - 76.52.13 - Glove Box Lid - Align
Remove
1. Remove centre screw from 2 scrivet fasteners. Release closing panel for access to glove box hinge fixings. Collect outer parts of fasteners from
closing panel.
2. Remove 2 bolts securing glove box hinges to fascia frame.
3. Open glove box lid, remove 5 screws securing glove box. Release glove box from fascia.
4. Disconnect glove box lamp multiplug.
5. Disconnect cable latch, remove glove box assembly.
Glove Box Lid
6. Remove split pin, disengage gas strut from lid.