landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Rear Seat Back - Squeak at Top of Seat Back|Page 16744 > < Recline Motor and Potentiometer (X280)|Page 16735
Page 1
background image

Seat Back: All Technical Service Bulletins
Rear Seat Back - Squeak at Top of Seat Back

8/9/95

76/35/95/US

SUBJECT:
Squeak From Rear Seat Back

MODEL:
Range Rover 4.0 SE

AFFECTED VEHICLES 
LP 300190 to 308967 
LH
LJ
LD

DETAIL

A squeak originating from the top of the rear seat back, where it contacts the rear shelf side support, can be repaired by attaching velour anti-squeak tape
to the shelf.

ACTION REQUIRED

If after a road test a rear seat squeak is identified in this area fit the anti-squeak tape.

PARTS INFORMATION

STC3106 - Anti-squeak tape

PROCEDURE

Release the rear seat and fold forward, giving a clear view of the clear plastic pad currently fitted to the rear shelf side support (see illustration).

Cut a piece of the anti-squeak tape to the appropriate size, remove the self adhesive backing and place over the existing clear plastic pad.

Return the seat to its normal position.

WARRANTY

Normal warranty policy and procedures apply.

COMP. CODE

8H4K

SRO

Rear Seat Back - Squeak at Top of Seat Back|Page 16744 > < Recline Motor and Potentiometer (X280)|Page 16735