Range Rover SE (LP) V8-4.0L (1995)
Rocker Arm Assembly: Removal and Replacement
Rocker Shafts
Rocker Shafts - Remove
1. LH rocker shaft only:Remove screw securing dipstick tube to rocker cover.
2. Remove 4 bolts securing rocker cover to cylinder head.
NOTE: Mark position of 2 longer bolts.
3. Remove rocker cover.
4. Remove and discard gasket from rocker cover.
5. Mark each rocker shaft in relation to original cylinder head.
CAUTION: Incorrect fitment of rocker shafts will lead to an oil feed restriction.
6. Progressively slacken and remove 4 bolts securing rocker shaft assembly to cylinder head.
7. Remove rocker shaft assembly.
8. Remove pushrods and store in fitted order.
Rocker shafts - dismantling