Range Rover SE (LP) V8-4.0L (1995)
Technical Service Bulletin # TEC1203972
Date: 970822
Oil Pressure Switch - Oil Leaks
No: 12/03/97/NAS
Ref: WSM section 12
Issue: 2
Date: 08/22/97
Changes are noted by asterisks.
PRIDE IV
4-07
Oil Pressure Switch Replacement
AFFECTED VEHICLE RANGE
RANGE ROVER (LP)
All
SITUATION:
OIL PRESSURE SWITCH LEAKS
Failure of the oil pressure switch leads to oil leakage.
RESOLUTION:
NEW DESIGN OIL PRESSURE SWITCH
To eliminate oil leakage a new oil pressure switch with an improved material O-ring has been developed. The new design switch is to be installed in
vehicles that have oil leakage from the oil pressure switch. The new switch is supplied with a new O-ring installed.
PARTS INFORMATION:
CAUTION:
Do not install old part (AMR2092) or O-ring (5TC3372)
LRNA4641
Oil Pressure Switch Kit with seals ............... Qty. 1
^
LRNA210181 Rubber O-ring (Serpentine belt) .................. Available separately
^
LRNA5716
Copper Washer (V-belt engines) ................. Available separately
LRNASGP2
Electrical connector grease
TOOL INFORMATION:
*Kent Moore Tool
J-21757-03
Oil Pressure Switch Socket*
WARRANTY CLAIMS:
12.60.50 ........... Time 0.55 hr
Install Oil Pressure Switch
COMP CODE:
7V4N
Normal warranty policy and procedures apply