Range Rover SE (LP) V8-4.0L (1995)
NOTE: New Range Rover timing cover illustrated.
9. Noting their fitted position, remove 9 bolts securing timing cover to cylinder block; remove cover; collect camshaft sensor harness mounting
bracket.
NOTE: Timing cover is dowel located.
CAUTION: Do not attempt to remove oil pump drive gear at this stage.
10. Remove and discard gasket.
11. Remove and discard oil seal from timing cover.
Timing Gears - Remove
1. Restrain camshaft gear and remove bolt securing gear.
2. Remove timing chain and gears as an assembly.
3. Collect Woodruff key from crankshaft.
Timing Chain And Gears - Inspection
1. Thoroughly clean all components.
2. Inspect timing chain links and pins for wear.
3. Inspect timing chain gears for wear. Replace components as necessary.
Timing Gears - Refit
1. Clean gear locations on camshaft and crankshaft, fit Woodruff key to crankshaft.