Range Rover SE (LP) V8-4.0L (1995)
Air Door Actuator / Motor: Service and Repair
Heating and Air Conditioning Servos
Service repair no - 80.20.03 - Distribution
Service repair no - 80.20.04/20 - Blend - air conditioned vehicles
Service repair no - 80.20.10 - Recirculation
Removal
1. Vehicles with heater only. Blend servos can be replaced with fascia in position. See: Blend Flap Servos - Heater Only
2. Remove fascia assembly.
Recirculation Flap Servos.
3. Disconnect multiplug. Release from recirculation flap housing.
4. Remove 2 screws securing servo to recirculation flap housing. Remove servo.
Blend and Distribution Servos.
5. Remove heater unit. See: Housing Assembly HVAC/Service and Repair
6. Remove 2 screws securing rear vent ducting.
Remove ducting from relevant side of heater.
7. Identify relevant pins in servo harness connector. Release 2 locking tags on rear of connector.