Range Rover SE (LP) V8-4.0L (1995)
NOTE:
To ensure proper execution of this campaign the following care points are provided to assist the technician.
USE OF CORRECT MINI-CLAMPS
^
Ensure that only factory-approved mini-clamps listed in the parts catalog are in all locations. (See illustration opposite.) Replace any worm-drive
clamps or other unapproved mini-clamps. The only location to use worm type clamps is the reuse of original equipment worm clamps at the throttle
body heater feed hose.
HOSE ORIENTATION
^
It is vital that all hoses be installed correctly on the thermostat housing. Verify that the component markings on the hoses correspond to the actual
installed position of the hose.
^
Always orient hoses so that there is no contact between the hose and a hard part or moving component.