Range Rover SE (LP) V8-4.0L (1995)
/v8-4.0l/Page-1291001.png)
Engine Control Module: Service and Repair
Service repair no - 18.30.01
Remove
1. Disconnect battery negative lead.
2. Remove 2 screws securing ECM housing cover. Remove cover
3. Slacken 2 harness clamp screws.
4. Lift ECM slightly for access. Disconnect 3 multiplugs.
5. Remove ECM from housing.
6. Remove carrier plate from ECM.
Refit
7. Reverse removal procedure.
