Range Rover SE (LP) V8-4.0L (1995)
Ignition Coil: Service and Repair
Service repair no - 18.20.45 - Set
Service repair no - 18.20.43 - Each
Service repair no - 18.20.44 - Extra - Each
Remove
1. Disconnect battery negative lead.
2. Disconnect H.T. leads from ignition coils. Note positions of leads.
3. Place H.T. leads aside.
4. Disconnect ignition coil multiplug.
5. Remove 6 nuts securing fuel rail and ignition coil bracket to inlet manifold.
6. Lift fuel rail slightly for access. Release ignition coil bracket from inlet manifold studs.
CAUTION: Do not completely withdraw injectors from fitted locations.
7. Remove ignition coils assembly.
8. Remove terminal cover.