landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Fog Lamp Modification - Pennsylvania Only|Page 9431 > < ECM/ABS ECU - DTC's P1317/P1703 Set|Page 9426
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
Fog Lamp Modification - Pennsylvania Only

28/7/95

H868

SUBJECT:
Fog Lamp Modification - State of Pennsylvania

MODEL
Range Rover 4.0 SE

AFFECTED VEHICLES
LP All 1995 Model Year 
LH
LJ
LD

DETAIL

The following modification disables fog lamp illumination whenever the head lamp high beam is selected. The modification includes a special link
harness used in conjunction with a latching fog lamp switch. The BeCM is reprogrammed to "no fog lamps fitted" using the Test Book BeCM
Reprogramming icon. All front lights will illuminated during the "flash to pass" mode.

ACTION REQUIRED

All 1995 Model Year Range Rover 4.0 SE's sold in the State of Pennsylvania require this modification. Follow the procedure below to install the service
kit.

PARTS INFORMATION

LRNASEALHC - Link Harness Kit

PROCEDURE

A.

Harness Installation.

1)

Disconnect the vehicle's battery.

2)

Remove the passenger's seat base trim to gain access to the BeCM.

Fog Lamp Modification - Pennsylvania Only|Page 9431 > < ECM/ABS ECU - DTC's P1317/P1703 Set|Page 9426