Range Rover SE (LP) V8-4.0L (1995)
/v8-4.0l/Page-436002.png)
6. Remove cover from sensor.
Refit
1. Fit cover to sensor.
2. Fit sensor, tighten bolts to 12 Nm (9 ft lbs).
CAUTION: Ensure bolts pass through cover and sensor.
3. Fit sensor link to radius arm. Tighten to 8 Nm.(6 ft lbs.).
4. Reverse removal procedure.
5. Recalibrate system if a new sensor has been fitted.
