landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Air Dryer, Suspension Control > < Reservoir Pressure Switch (X204)|Page 12924
Page 1
background image

Accumulator: Service and Repair

Air Reservoir

Service Repair No - 60.50.03

WARNING: Air suspension is pressurized to 10 bar (150 lbs/in2). Dirt or grease must not enter the system. Wear hand, ear and eye safety
standard protection when servicing system.

Removal

1. Depressurize system
2. Raise the vehicle.

WARNING: Support on safety stands.

3. Clean air connection.

4. Release air pipe from reservoir, seal hose and reservoir.
5. Remove 3 bolts securing reservoir. Remove reservoir.

Installation

1. Fit reservoir, tighten bolts to 25 Nm. (18 ft.lbs.)
2. Remove seals from air pipe and reservoir.
3. Connect air hose to reservoir.
4. Leak test reservoir
5. Fit rubber boot to connection.
6. Remove safety stands. Lower vehicle.

Air Dryer, Suspension Control > < Reservoir Pressure Switch (X204)|Page 12924