Range Rover SE (LP) V8-4.0L (1995)
Air Spring: Service and Repair
Front Suspension
Air Spring
Removal
WARNING: Air suspension is pressurized up to 10 bar (150 psi). Dirt and grease must not enter the system. Wear hand, ear and eye standard
protection when servicing the system.
WARNING: Shock absorbers must be fitted before inflating air springs. Failure to observe this warning could cause air spring damage. DO
NOT ATTEMPT TO DISMANTLE AIR SPRINGS.
1. Raise the vehicle.
WARNING: Support on safety stands.
2. Remove wheel arch liner.
3. Support chassis under front cross member.
4. Depressurize system.
5. Clean area, disconnect hose from air spring. Seal hose and spring.
6. Remove clips securing air spring.