Range Rover SE (LP) V8-4.0L (1995)
Level Control Solenoid Valve: Service and Repair
Solenoid Valve Block and Drive Pack
Solenoid Valve Block And Drive Pack
WARNING: The system is pressurized up to 10 bar. Dirt or grease must not enter the system. Wear hand, ear and eye safety standard
protection when servicing system.
Removal
Petrol Vehicles Only:
1. Disconnect vacuum dump hose from 'T' piece on cruise control actuator.
2. Remove 2 screws securing actuator bracket to air supply unit. Move actuator aside.
All Models:
1. Depressurize system.
2. Remove air compressor.
3. Disconnect all air pipes. Remove exhaust silencer from valve block.
4. Seal exposed air hoses and valve block