landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

A/T - Flex Plate Spacer Specifications|Page 10233 > < A/T - Flex Plate Spacer Specifications
Page 1
background image

Flex Plate: Technical Service Bulletins
A/T - Twin Plate Drive System

10/11/95

44/03/95/US

SUBJECT
Twin Flexi-Drive Plate System Automatic Gear Box

MODEL

Range Rover 4.0/4.6

AFFECTED VEHICLES 
LP All 
LH 
LJ
LD

DETAIL

All Range Rover 4.0/4.6 vehicles have a twin plate drive system. This drive system helps minimize noise vibration and harshness in the power unit.

This bulletin is to highlight the part differences between the 4.0 litre and 4.6 litre vehicles.

ACTION REQUIRED

If a gearbox has to be removed/re-fitted, refer to the information below.

PROCEDURE

Refer to the workshop manual section 44 for remove and refit of the automatic gearbox.

When re-fitting the gearbox ensure that the parts are fitted as follows:

The thick spacer (approximately 12 mm) should be fitted into the 4.0 litre vehicles only.

The thin spacer (approximately 4 mm) should be fitted into the 4.6 litre vehicles only.

WARRANTY

Normal warranty policy and procedures apply

SRO

N/A

General arrangement of the Twin Plate Drive configuration 4.6 litre only.

A/T - Flex Plate Spacer Specifications|Page 10233 > < A/T - Flex Plate Spacer Specifications