Range Rover SE (LP) V8-4.0L (1995)
Rear Door Window Motor: Service and Repair
Harness - Rear Door
Harness - Rear Door
Service Repair No - 86.25.21
Remove
1. Remove rear door plastic sheet.
2. Release window lift switch from location and disconnect multiplug.
3. Disconnect multiplugs from door lock, puddle lamp and window lift motor.
4. Release 8 clips securing harness to window lift panel and inner door skin.
5. Release harness protection sheath from door and 'B/C' post.
6. Release grommet and feed amplifier/speaker harness into door.
7. Remove harness from door.
8. Release harness from 'B/C' post to access 3 multiplugs. Disconnect multiplugs.
9. Remove rear door harness.
Refit
10. Reverse removal procedure.