landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Liftgate Window Glass|Service and Repair|Page 13872 > < Hood Sensor/Switch (For Alarm)|Locations|Page 13867
Page 1
background image

Liftgate Window Glass: Service and Repair

Liftgate Window Glass

Service Repair No - 76.31.22

Removal

CAUTION: Always protect paintwork and glass when removing exterior components.

NOTE: The liftgate glass striker is bonded to the liftgate glass and cannot be adjusted or replaced.

1. Disconnect the battery ground cable.
2. Remove the rear spoiler.
3. Remove the liftgate glass trim panel.
4. Remove the rear window wiper motor.
5. Release the headlining.

^

Release the liftgate seal.

^

Release the 2 clips.

6. Release the liftgate wiring harness.

^

Release the gaiter.

^

Release and disconnect the 2 electrical connectors.

^

Release the washer jet hose.

7. WARNING: Make sure the liftgate is supported.

Remove the liftgate glass support struts.
^

Release the 2 clips.

^

Repeat the above procedure for the other side.

Liftgate Window Glass|Service and Repair|Page 13872 > < Hood Sensor/Switch (For Alarm)|Locations|Page 13867