landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Valve Cover > < Fuel Pressure Release|Service Precautions|Page 3354
Page 1
background image

Fuel Pressure Release: Service and Repair

Fuel System Pressure Release - 4.2L 

Service Repair No - 19.50.02

Special Service Tools

1. Disconnect the battery ground cable.
2. Remove the engine cover.
3. Disconnect fuel line from the fuel rail.

^

Position an absorbent cloth to collect fluid spillage.

WARNING:
^

The spilling of fuel is unavoidable during this operation. Ensure that all necessary precautions are taken to prevent fire and explosion

^

Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly
flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury

^

Do not carry or operate cellular phones when working on or near any fuel related components. Highly flammable vapors are always
present and may ignite. Failure to follow these instructions may result in personal injury.

CAUTION: Before disconnecting or removing components, ensure the area around the joint faces and connections are clean. Plug open
connections to prevent contamination.

4. Connect the fuel line to the fuel rail.

^

Clean the component mating faces.

5. Install the engine cover.
6. Connect the battery ground cable.

Valve Cover > < Fuel Pressure Release|Service Precautions|Page 3354