Range Rover Sport (LS) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-818003.png)
6. Install the valve cover retaining bolts.
^
Install valve cover retaining bolts to their position previously noted.
^
Tighten the bolts to 12 Nm (9 ft. lbs.).
^
Complete the tightening sequence as illustrated.
7. Attach the engine wiring harness to the retaining bracket.
8. Connect the PCV line.
^
Clean the component mating faces.
9. Install the air intake resonator.
10. Install the air cleaner assembly.
11. Install the ignition coil-on-plugs.
12. Install the remaining ignition coil-on-plugs.
13. Connect the battery ground cable.
