Range Rover Sport (LS) V8-4.2L SC (2006)
14. Remove the generator mounting bracket.
^
Remove the 4 bolts.
15. Remove the crankshaft front oil seal.
16. Remove the RH valve cover.
17. Remove the LH valve cover.
18. Remove the engine front cover.
^
Release the engine wiring harness clips.
^
Remove the 24 bolts.
^
Remove and discard the gasket.
Installation
1. Install the engine front cover.
^
Clean the component mating faces.
^
Apply a bead of sealant 3 mm diameter, by 12 mm long, to the 8 places indicated.
2. Evenly and progressively tighten the bolts in the sequence shown to 12 Nm (9 ft. lbs.).