Range Rover Sport (LS) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-958002.png)
Installation
1. NOTE: Do not tighten the retaining clamp at this stage.
Position the RH tail pipe to the muffler assembly.
^
Clean the components.
^
Install the retaining clamp.
2. NOTE: Do not tighten the retaining clamp at this stage.
Position the 4.2L tail pipe to the muffler assembly.
^
Clean the components.
^
Install the retaining clamp.
3. With assistance, install the muffler assembly.
^
Attach the exhaust hangers.
^
Install a new gasket.
^
Tighten the catalytic converter nuts and clamp to 48 Nm (35 ft. lbs.).
4. Align both tail pipes and tighten the retaining clamps to 55 Nm (40 ft. lbs.).
