landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 11611 > < Diagram Information and Instructions|Page 11609
Page 1
background image

Compressor HVAC: Service and Repair

Air Conditioning (A/C) Compressor 

Service Repair No - 82.10.20

Removal

1. Disconnect the battery ground cable.
2. Recover the A/C refrigerant.

WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

3. Raise and support the vehicle.
4. Remove the LH front wheel.
5. Remove the fender splash shield.
6. Remove the power steering pump.
7. Release the transmission cooler pipe clips.
8. Remove the power steering pump mounting bracket.

^

Remove the 3 bolts.

9. Remove the engine compartment LH upper heat shield.

^

Remove the screw.

^

Release the 2 mounting clips.

CAUTION: Always plug any open connections to prevent contamination.

10. Disconnect the refrigerant lines from the A/C compressor.

^

Remove the 2 bolts.

^

Remove and discard the O-ring seal.

11. Disconnect the A/C clutch electrical connector.

CAUTION: Always plug any open connections to prevent contamination.

Diagram Information and Instructions|Page 11611 > < Diagram Information and Instructions|Page 11609