Range Rover Sport (LS) V8-4.2L SC (2006)
^
Select the "Vehicle Configuration" tab.
^
Select "Module Information".
^
Select "Network Integrity Test".
Note the software part numbers displayed on the WDS screen.
3.
Configure the HVAC control module software as follows:
^
Return to "Vehicle Configuration" screen.
^
Select "Module Configuration".
^
If the software part number displayed on the screen is not the same as noted in Step 2 proceed to configure the HVAC control module as
follows:
^
Select "Configure Existing Modules".
^
Select "Heating Ventilation and Air Conditioning Control Module" from the sub-menu.
^
Check tick-box to continue and follow on-screen instructions.
4.
Repeat Step 2 to confirm the software level change.
5.
Exit the WDS session and disconnect the diagnostic equipment from the vehicle.
Disclaimer