Range Rover Sport (LS) V8-4.2L SC (2006)
Fluid - Transfer Case: Service and Repair
Transfer Case Draining and Filling
Service Repair No - 41.20.04
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Position a container to collect the fluid.
3. Remove the fluid drain plug.
^
Clean the immediate area.
^
Remove and discard the sealing washer.
4. Allow the fluid to drain.
5. Install the drain plug and tighten it to 22 Nm (16 lb.ft).
^
Clean the component mating faces.
^
Install a new sealing washer.
6. Remove the fluid filler/level plug.
^
Clean the immediate area.
^
Remove and discard the sealing washer.
7. Refill transfer case with the recommended fluid, until the fluid is level with bottom of filler/level plug hole.
8. Install the fluid filler/level plug and tighten to 22 Nm (16 lb.ft).
^
Clean the component mating faces.
^
Install a new sealing washer.