Range Rover Sport (LS) V8-4.2L SC (2006)
Intake Air Temperature Sensor: Service and Repair
Intake Air Temperature (IAT) Sensor
Service Repair No - 18.30.09
Removal
1. Disconnect the battery ground cable.
2. Remove the air intake resonator.
3. Position the wiring harness support bracket aside.
^
Release the 2 fuel pipe clips.
^
Remove the 4 bolts.
4. Remove the throttle body intake.
^
Release the clip.
^
Release the bushing.
CAUTION: Before disconnecting or removing the components, ensure the area around the joint faces and connections are clean. Plug
open connections to prevent contamination.
5. Position the supercharger pressure relief actuator aside for access.
^
Remove the bolt.