Range Rover Sport (LS) V8-4.2L SC (2006)
6. RH side only: Release the coolant hose support bracket.
^
Remove the Torx screw.
Installation
1. Install the charge air cooler.
^
Clean the component mating faces.
^
Install a new gasket.
^
Tighten the Torx screws to 10 Nm (7 ft. lbs.).
2. RH side only: Connect the IAT sensor electrical connector and coolant hose support bracket.
^
Tighten the Torx screw to 10 Nm (7 ft. lbs.).
3. Connect the charge air cooler coolant hoses.
^
Clean the component mating faces.
^
Secure with the clips.
4. Install the supercharger.
5. Connect the battery ground cable.