Range Rover Sport (LS) V8-4.2L SC (2006)
Throttle Body: Specifications
Intake Air Distribution and Filtering
Torque Specifications
Throttle Body Intake Spigot ..................................................................................................................................................................... 25 Nm (18 ft. lbs.)
Supercharger Retaining Bolt ..................................................................................................................................................................... 21 Nm (15 ft. lbs.)
Charge Air Cooler Intake Duct to Supercharger Outlet Pipe ...................................................................................................................... 10 Nm (7 ft. lbs.)
Supercharger Outlet Pipe ............................................................................................................................................................................ 10 Nm (7 ft. lbs.)
Wiring Harness Support Bracket ................................................................................................................................................................ 10 Nm (7 ft. lbs.)
Charge Air Cooler Retaining Torx Screws ................................................................................................................................................. 10 Nm (7 ft. lbs.)
Coolant Hose Support Bracket Torx Screw ................................................................................................................................................ 10 Nm (7 ft. lbs.)
Throttle Body Elbow Retaining Bolts ....................................................................................................................................................... 25 Nm (18 ft. lbs.)
Supercharger Pressure Relief Actuator Bolt ............................................................................................................................................... 10 Nm (7 ft. lbs.)
Manifold Absolute Pressure (MAP) Sensor Retaining Allen Screw ............................................................................................................. 3 Nm (2 ft. lbs.)