landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Body Controls - Alarm Sounds Upon Liftgate Opening|Page 515 > < Body Control Module - Aborted CJB Software Update|Page 510
Page 1
background image

Body Control Module: Customer Interest
Body Controls - Alarm Sounds Upon Liftgate Opening

No.: LS419-002

Issue: 1

Date: July 03, 2006

SECTION: 419-01

Anti-Theft Alarm Sounds When Liftgate is Opened

AFFECTED VEHICLE RANGE:

Range Rover Sport (LS)

VIN: 6A900129 to 6A955485

CONDITION SUMMARY:

NEW CJB SOFTWARE AVAILABLE TO RESOLVE ALARM SYSTEM TRIGGERING WHEN THE LIFTGATE IS OPENED

Situation: 
A customer may report a concern that the vehicle alarm sounds when opening the liftgate. After a remote handset is used to 'release' the liftgate, the
Central Junction Box (CJB) expects to receive an 'open' state signal (when the liftgate is physically opened) within a set time period. If the liftgate is not
opened within the set time period, after remote activation, the anti-theft system will reset. Opening the liftgate after the alarm system has reset is then
registered as an 'unauthorized entry' condition, triggering the alarm system. The current preset time period is a short 400 milliseconds.

NOTE:

The new CJB software increases the time period for "authorized" access to 30 seconds after the tailgate is "released" using the remote handset. The
alarm is triggered if the liftgate is "opened" after this time period expires. The customer should be made aware that this anti-theft alarm feature
protects the vehicle from "unauthorized" access if the liftgate is accidentally "released" by the remote handset.

Action:
Should a customer express a concern regarding this situation, refer to the Repair Procedure detailed in this bulletin to update the Body Control Module
software to increase the authorized entry time to 30 seconds.

TOOLS

WARRANTY:

NOTE:

Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always
refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

REPAIR PROCEDURE

DOWNLOAD LATEST CJB SOFTWARE TUNE

1.

If WDS CD13-Patch File 5 (or later) is installed or IDS DVD101 (or later) is being used, go to step 6.

NOTE:

A software patch installation help file located on GTR provides instructions for the patch file installation process and could take up to six
minutes to download depending on connection speed. For information on how to confirm that the patch file has been correctly installed onto

Body Controls - Alarm Sounds Upon Liftgate Opening|Page 515 > < Body Control Module - Aborted CJB Software Update|Page 510