Range Rover Sport (LS) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-297001.png)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Engine Coolant Temperature (ECT) Sensor
Service Repair No - 18.30.10
Removal
1. Disconnect the battery ground cable.
2. Remove the engine cover.
3. Remove the ECT sensor.
^
Position an absorbent cloth to collect fluid spillage.
^
Disconnect the electrical connector.
^
Release the clip.
^
Remove the sensor and discard the seal.
Installation
1. To install, reverse the removal procedure.
^
Clean the component mating faces.
^
Check and top-up the coolant if required.
