landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Steering - Squeaking Noise When Turning|Page 9713 > < Steering - Tie Rod/Tie Rod End Replacement Information|Page 9703
Page 1
background image

Power Steering Bleeding: Customer Interest
Steering - Squeaking Noise When Turning

No.: LTB00072

Issue: 1

Date: 11 Sept 2007

IF THE VEHICLE FALLS WITHIN THE AFFECTED VIN RANGE QUOTED IN LTB00021, THE REPAIRS IN THAT TECHNICAL BULLETIN
MUST BE COMPLETED AND THE SQUEAK RE-VERIFIED PRIOR TO PERFORMING THE REPAIR IN THIS TECHNICAL BULLETIN.
CLAIM THE LTB00021 REPAIR SEPARATELY

SECTION: 211-00

Steering Gear Squeak

AFFECTED VEHICLE RANGE:
Range Rover Sport (LS)

VIN: 6A900290 - Onwards

CONDITION SUMMARY:

STEERING NOISE RESULTING FROM FLUID CONTAMINATION

Situation: 

The customer may complain of a squeaking noise from the bulkhead area when turning the steering wheel. On affected vehicles the repairs in LTB00021
"Steering Gear Noise" must be completed prior to evaluating this noise.

The noise level does not change with road speed but may vary depending on speed of steering wheel rotation and temperature. It is possible that the 
power steering fluid has become contaminated.

Action: 

Should a customer express concern, and the repair in LTB00021 on affected vehicles has been unsuccessful, flush the steering system with fresh fluid as
specified, and replace the steering gear and reservoir. Exercise caution to ensure extreme cleanliness at all stages of this repair.

PARTS

WARRANTY

FLUSH POWER STEERING SYSTEM

NOTE: 

To reduce spillage of fluid on the vehicle, cover the area beneath the fluid reservoir with suitable rag.

REPAIR PROCEDURE

Steering - Squeaking Noise When Turning|Page 9713 > < Steering - Tie Rod/Tie Rod End Replacement Information|Page 9703