Range Rover Sport (LS) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-2309003.png)
10. CAUTION: Use a Torx socket to prevent the ball joint rotating whilst removing the nut.
CAUTION: Note the position of the hardened steel washer. The hardened steel washer must be installed between the stabilizer bar link and the
upper arm. Failure to follow this instruction may result in damage to the vehicle.
Release the stabilizer bar link.
^
Discard the nut.
11. Loosen the upper arm retaining nut.
12. Using the special tool, release the upper arm ball joint.
13. Using the special tools, release the halfshaft from the drive flange.
