landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Suspension - Warning Lamp ON/Multiple Codes Set|Page 10447 > < Suspension - Warning Lamp ON/Multiple Codes Set|Page 10445
Page 9
background image

^

If condition A is present no action is required.

^

If condition B is present, discard the reservoir and continue inspection and diagnosis from step 6 below.

^

If condition C is present, discard the reservoir and continue inspection and diagnosis from step 5 below.

NOTE:

Global Technical Reference (GTR) lookup sequence is as follows:

GTR Home > NAS > LS  Range Rover Sport> Service Information/ 2007 > Workshop Manuals > Bookmark "Chassis/204-06 Ride and
Handling Optimization" LINK "Valve Block (60.60.20)"

3.

If indicated in "Diagnostic Procedure" Step 7, refer to GTR section 204-06 to install a new valve block.

4.

If a valve block replacement is not indicated in "Diagnostic Procedure" Step 7, refer to GTR Workshop Manual, section: 204-06 (60.60.21) to
inspect the valve block filter as follows:

^

Remove the valve block filter.

^

Inspect the filter for signs of distortion or discoloration indicating excessive system pressure. (X in Figure 7)

^

Replace a distorted or discolored filter.

NOTE:

Suspension - Warning Lamp ON/Multiple Codes Set|Page 10447 > < Suspension - Warning Lamp ON/Multiple Codes Set|Page 10445