Range Rover Sport (LS) V8-4.2L SC (2006)
Ride Control Solenoid Valve: Service and Repair
Vehicle Dynamic Suspension
Air Suspension Reservoir Solenoid Valve Block
Air Suspension Reservoir Solenoid Valve Block
Service Repair No - 60.50.05
Removal
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Using T4, depressurize the air suspension.
3. Remove the air suspension compressor lower cover.
^
Remove the 3 bolts.
^
Release the 5 clips.
4. Move the air compressor electrical connector aside.
^
Release the 2 clips.
5. CAUTION: Before the disconnection or removal of any components, ensure the area around joint faces and connections are clean. Plug any open
connections to prevent contamination.
CAUTION: Visually inspect the air line ends for damage or wear. Repair or replace the air line as necessary.
NOTE: Note the air line fitted positions.
Remove the air suspension reservoir solenoid valve block.
^
Disconnect the 4 air lines.
^
Disconnect the 2 electrical connectors.
^
Release the valve block 3 rubber insulators.