Range Rover Sport (LS) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-2462007.png)
^
Disconnect the RH mass air flow (MAF) sensor electrical connectors. (Figure 5)
^
Remove the RH air cleaner assembly.
NOTE:
Some fluid spillage is inevitable during the reservoir removal operation.
^
Position container to collect fluid loss.
CAUTION:
Clean working conditions are critical before disconnecting or removing the components.
^
The area around the joint faces and connections must be cleaned and kept clean during work.
^
Open connections must be plugged to prevent contamination.
^
Remove the fluid reservoir as follows:
^
Clamp the hoses with hose pliers to prevent air ingress.
^
Release the two hose clamps.
^
Disconnect the hoses from the fluid reservoir.
NOTE:
Filter contamination can provide guidance for system troubleshooting and repair:
