Range Rover Sport (LS) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-2467004.png)
3. CAUTION: Make sure that the bearing seal is not damaged when installing the circlip.
Install the circlip.
4. Install the brake disc dust shield.
^
Tighten the bolts to 9 Nm (7 ft. lbs.).
5. WARNING: Do not use compressed air to clean brake components. Dust from friction materials can be harmful if inhaled.
Clean the backing plate and apply grease to the brake shoe contacts.
6. Clean the adjuster and set it to its minimum extension.
7. Install the secondary brake shoe.
^
Connect the parking brake cable retaining spring to the brake shoe lever, making sure the spring is not twisted.
^
Install the hold-down spring and retaining pin.
8. Install the primary brake shoe.
^
Install the spreader plate and the spring.
^
Install the return spring.
^
Install the hold-down spring and retaining pin.
9. Install the return spring.
10. Install the brake shoe adjuster.
11. Using the special tools, install the drive flange.
