Range Rover Sport (LS) V8-4.4L (2009)
All vehicles
16. Remove the headlamp washer jet hose.
^
Release from the 5 clips.
Installation
All vehicles
1. Install the headlamp washer jet hose.
^
Secure in the 5 clips.
Vehicles with parking aid
2. Install the parking aid sensor wiring harness.
^
Install the securing straps.
3. Install the parking aid sensor trim panels.
4. Install the parking aid sensors.
^
Connect the parking aid electrical connectors.
All vehicles
5. Install the washer jets.
^
Install the clips.
6. Connect the front fog lamp electrical connector.
^
Repeat the above procedure for the other side.
7. Install the front fog lamp.
^
Tighten the screws.
8. Install the front fog lamp bezel.
^
Secure the clips.
^
Repeat the above procedure for the other side.
9. Connect the hose.
10. With assistance, install the front bumper cover.
^
Connect the headlamp washer jet hoses.
^
Connect and secure the electrical connectors.
^
Secure in the clips.
11. Install the front bumper cover fixings.
^
Install the bolts and tighten to 10 Nm (7 ft. lbs.).