Range Rover Sport (LS) V8-4.4L (2009)
Installation
1. Install the rear door window fixed glass.
^
Clean the component mating faces.
^
Secure the 2 clips.
^
Tighten the Torx screws to 10 Nm (7 ft. lbs.).
2. Install the guide channel lining.
3. Install the inner waist seal.
4. Install the door frame trim.
^
Clean the component mating faces.
^
Remove backing tape from adhesive strip.
5. NOTE: Wedge the glass in this position.
Raise the rear door glass fully.
^
Engage the door glass with the channel.
6. Install the rear door window motor and regulator assembly.