Range Rover Sport (LS) V8-4.4L (2009)
/v8-4.4l/Page-2238006.png)
Removal
1. Remove the lower quarter trim panel.
2. NOTE: Left-hand shown, right-hand similar.
With assistance, remove the rear seat assembly.
^
Remove and discard the 7 Torx bolts.
^
Disconnect the electrical connector.
3. Remove the safety belt lower anchor.
^
Remove and discard the Torx bolt.
4. Remove the D-pillar trim panel.
^
Release the 4 clips.
^
Release the safety belt from the trim panel.
5. NOTE: Do not disassemble further if the component is removed for access only.
Remove the 4 clips from the D-pillar upper trim panel.
Installation
