Range Rover Sport (LS) V8-4.4L (2009)
5. NOTE: Note the fitted position.
Remove the lower quarter trim panel.
^
Remove the access cover.
^
Release the 11 clips.
6. NOTE: Do not disassemble further if the component is removed for access only.
Remove the 8 clips.
Installation
1. Install the clips.
2. Install the load space lamp unit.
^
Connect the electrical connector.
3. NOTE: Align to the position noted on removal.
Install the lower quarter trim panel
^
Secure the clips.
^
Install the access cover.
4. Install the liftgate seal.
5. Install the door seal.