Range Rover Sport (LS) V8-4.4L (2009)
/v8-4.4l/Page-1456007.png)
12. Secure the RH rear brake caliper.
^
Remove and discard the tie strap.
^
Tighten the bolts to 115 Nm (85 ft. lbs.).
13. Adjust the parking brake shoes.
14. Bleed the brake system.
15. Install the wheels and tires.
^
Tighten the wheel nuts to 140 Nm (103 ft. lbs.).
16. Install fuse number 8 into the BJB.
17. Using the Land Rover approved diagnostic system, calibrate the parking brake actuator on an even surface.
18. Apply and release hand brake to confirm operation.
